Shell Varnish Removal Fluid

Shell Varnish Removal Fluid is a synthetic based solvency enhancer, that improves the solubility of used oil. When added to in-service oil, at the recommended treat rate, Shell Varnish Removal Fluid improves the solubility of used oil and solubilizes oil varnish precursors, which may subsequently be removed by varnish removal filtration technology. This leads to longer oil life and mitigate against the risks associated with varnish formation in rotating equipment. Shell Varnish Removal Fluid is recommended to be used in oil systems in rotating equipment such as steam, gas and combined cycle turbines in power generation or marine service. The product can also be used in air turbocompressors in the fertilizer, petrochemicals and oil & gas industries. Furthermore, Shell Varnish Removal Fluid can be used in hydraulic systems and other gear, bearing and circulating applications. However, care must be taken if Shell Varnish Removal Fluid is added to systems where the operating oil viscosity is over 150 cSt at 400C. In these system, the effect oil dilution must be taken into consideration, please consult your local Shell Representative. This product can be used in any oil application where varnish contamination accelerates the formation of deposit and leads to valve sticking or the accumulation of system deposits. Note: this product should not be used with water based or grease systems.